Rough Country Suspension Systems - Jeep Cherokee XJ (84-02) - 6.5 Inch Suspension Lift Kit

RC NITRO 9000 SHOCK UPGRADE - The Rough Country Nitro 9000 series shock absorbers incorporate self adjusting "Velocity Sensitive Valving." This revolutionary technology varies the resistance valving incorporated in the shock according to piston rod speed. Performance Proven 10-Stage Variable Valving 200 psi Nitrogen Charged Massive 1 3/8" Bore Chromed Hardened 9/16" Piston Rod Spring Loaded Piston Rod Seal Military Spec. Fluid Rated To –50° C Limited Lifetime Warranty Poly-urethane bushings for long life

RC SHOCK BOOTS UPGRADE - Shock boots are manufacturered from polyurethane and feature stainless steel clamps, helping to protect your shock shaft and shock seal from damage from off-road debris and obstacles found on the 4X4 trail. Available in Black, Red, Yellow and Blue.

RC STEERING STABILIZER UPGRADE - OEM replacement steering stabilizer allows for better on-road and off-road handling with oversized tires, as well as improves tie rod and ball joint wear and tear.

SLIP YOKE ELIMINATOR / CUSTOM CV DRIVESHAFT - Jeep model NP231 transfer cases have one glaring weak point. They use a slip yoke on the rear output shaft of the transfer case instead of having a fixed yoke and a driveshaft with slip splines. This design works fine on the street but once you have lifted your Jeep and installed bigger tires on it, the stress on the slip yoke or rear output shaft is often too much. This kit includes everything to modify your transfer case, this kit does require our extended travel driveshaft, which helps to prevent driveline vibration and the rear ouput shaft from breaking.

The Rough Country Jeep Cherokee XJ (84-02) 6.5 Inch Suspension Lift Kit converts your Jeep Cherokee into a rock crawler. Install 33x12.50 tires or up to 35-inch tires with additional modifications. The Jeep lift kit installs in 6-8 hours and is completely bolt-on.

SUSPENSION / LIFT KIT FEATURES

• 100% Bolt-on Installation
• Fits 33-inch tires with no rubbing or trimming of the fender.
• Fits 35-inch tires with minor trimming of the fender well.

SUSPENSION / LIFT KIT SPECS

• Install in 6-8 hours
• Fits 33x12.50 tires

SUSPENSION / LIFT KIT CONTENTS

• Front coil springs
• Front upper adjustable control arms
• Front lower adjustable control arms
• Transfer case drop kit
• Front adjustable track bar
• Adjustable sway-bar quick disconnects
• Power steering pitman arm
• Brake line relocating brackets
• 4 RC Hydro 8000 series shocks
• Rear leaf springs
• Rear shackles

JEEP LIFT KIT FITS

• Jeep Cherokee XJ (1984-2002)

RECOMMENDATIONS

• Because of the increased height and increased angle on the driveline, which often causes driveline vibration at certain speeds and increases wear on driveline components, we recommend use of the Slip Yoke Eliminator (SYE) Kit as well as a longer driveshaft. The SYE Kit only fits models with NP231 Transfer Case. You can determine which T-case you have by simply crawling under your Jeep and look at the tab on the back of the transfer case.

DOWNLOAD INSTRUCTIONS

• DOWNLOAD: Jeep Cherokee XJ (1984-2002) 6.5-Inch Suspension Lift Kit Instructions