Mag Hytec Heavy Duty Differential Cover - Ford 12-10.25 / 12-10.5 Rear Axle
PART PRICE:
$238.00 PART NUMBER: MAG-FORD-12-10-25-25-10-5
Mag-Hytec is at the forefront of heavy duty differential covers and transmission pans, which are engineered to provide increased
lubricant and cooling capacity for extreme duty recreational vehicles ( RV ), commercial service
vehicles, work trucks and overall high performance 4X4 truck applications.
Each unit is fitted with ARP 568
O-rings for superior sealing. All hardware is 303 stainless steel in most applications no gasket or sealant is required and all Mag-Hytec parts are covered by a lifetime limited warranty. The dipstick is knurled for quick removal the flat is marked low/high to check lube level and a magnet which acts as an open filter is in the lower end. The MS 7/8 - 14 THD port is large enough to use for filling. The magnet-filled drain plug is the same MS port as the dipstick. Both the dipstick and drain are O-ring sealed. The sending unit fitting is 1/8 pipe THD and shipped with a stainless pipe plug. The calibration plug is centered on the serial number plate and approximates the stock cover fill plug for factory fluid level. The O-ring is snapped into the inverted "V" groove for a positive seal without gasket or silicone. Plugs cap screws and washers are stainless steel in most applications. Mag-Hytec manufactures the best covers and pans available today.
Mag-Hytec diff covers and transmission pans set off-road commercial work trucks and toy haulers apart in eye-catching fit and reliable function as the highly functional and recognizable components are cast in A356-T6 aluminum and texture powder coated black with precision machined cooling fins. These cooling fins greatly increase oil and fluid cooling temperatures as they increase usually while pulling heavy loads up steep grades and hot conditions.
Calfornia's Baker Grade on Interstate 15 is notorious for such conditions. The road that stretches the span of the Mojave Desert from Los Angeles to Las Vegas claims many recreational and tow vehicle failures due to excessive heat in the transmission and rear differential. The Mag Hytec is just one method of combating the extremes of such conditions.
The Mag Hytec magnetic drain plugs that accompany the Mag Hytec Heavy Duty Differential Covers and Transmission Pans extract worn metal shavings from the lubrication system reducing component wear and increasing longevity.
Each Mag Hytec Diff Cover and Transmission Pan is fitted with ARP 568 O-rings for superior sealing. All hardware is 303 stainless steel. In most applications no gasket or sealant is required and all Mag-Hytec parts are covered by a lifetime limited warranty. Depend on Mag-Hytec when you're pulling a heavy load.
